Excavator Attachments for Hire
Plate Compactor Attachment
Excavator Attachments for Hire
Plate Compactor Attachment
There are a range of hydraulic plate compactors attachments available for hire which suits 5 tonne – 13 tonne excavators / diggers.
Hydraulic plate compactors also known as 'vibe heads' can be used for driving in posts for retaining walls, shelter belts etc.
Plate compactors can be used to compact material in hard to reach areas such as inside trenches or on batters.
Plate compactor digger attachments are available to hire from both the Allways Hire branches in Hastings and Napier. Enquire now.
Specifications
HYDRAULIC OIL FLOW REQUIRED
100 – 120 Litres per minute
HYDRAULIC PLUMBING REQUIRED
Directly join the hoses, not to be used with couplings
Delivery & Instructions
TRANSPORT REQUIRED
Trailer or Truck
Safety Equipment Required
Compare our hire ready equipment
HYDRAULIC OIL FLOW REQUIRED
HYDRAULIC PLUMBING REQUIRED
5T, 10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
DIRECTLY JOIN THE HOSES, NOT TO BE USED WITH COUPLINGS
1.7T - 10T Excavators / Diggers
Single Hydraulic Lever - 1 Pair of Hydraulic Outlets
5.5T and 10T Excavators / Diggers
TWO HYDRAULIC HOSES WITH 1/2 INCH HYDRAULIC COUPLINGS ARE REQUIRED. MUST BE FITTED TO EXCAVATOR WITH FRONT GUARDING.
230mm-600mm wide trench buckets
5.5T Excavators / Diggers
Connect the hydraulic couplings to the digger
10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
Directly join the hoses, can be used with couplings. 12V plug required.
TRUCK OR TRAILER, OR BACK OF UTE
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
1.7T EXCAVATORS, 5.5T EXCAVATORS
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
LATEST NEWS