Excavator Attachments
Plate Compactors
Excavator Attachments
Plate Compactors
There are a range of plate compactors available for hire which suits 5 tonne – 13 tonne excavators / diggers.
Plate compactors can be used for driving in posts for retaining walls, shelter belts etc.
Plate compactors can be used in hard to reach areas such as inside trenches.
Plate compactor digger attachments are available to hire from both the Allways Hire branches in Hastings and Napier. Enquire now.
Specifications
HYDRAULIC OIL FLOW REQUIRED
100 – 120 Litres per minute
HYDRAULIC PLUMBING REQUIRED
Directly join the hoses, not to be used with couplings
Delivery & Instructions
TRANSPORT REQUIRED
Trailer or Truck
Safety Equipment Required
Compare our hire ready equipment
HYDRAULIC OIL FLOW REQUIRED
HYDRAULIC PLUMBING REQUIRED
5T, 10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
DIRECTLY JOIN THE HOSES, NOT TO BE USED WITH COUPLINGS
1.7T - 10T Excavators / Diggers
Single Hydraulic Lever - 1 Pair of Hydraulic Outlets
5.5T Excavators / Diggers
TWO HYDRAULIC HOSES WITH 1/2 INCH HYDRAULIC COUPLINGS ARE REQUIRED. MUST BE FITTED TO EXCAVATOR WITH FRONT GUARDING.
230mm-600mm wide trench buckets
5.5T Excavators / Diggers
Connect the hydraulic couplings to the digger
10T, 12T, 13T, 13.5T Excavators / Diggers
100 – 120 LITRES PER MINUTE
DIRECTLY JOIN THE HOSES, NOT TO BE USED WITH COUPLINGS
TRUCK OR TRAILER, OR BACK OF UTE
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
1.7T EXCAVATORS, 5.5T EXCAVATORS
CONNECT THE HYDRAULIC COUPLINGS TO THE DIGGER
CONNECT THE 1/2 inch HYDRAULIC COUPLINGS TO THE DIGGER
LATEST NEWS